Addressing Mold Remediation in the Spring / Tomball Area

9/19/2023 (Permalink)

Don’t let mold take over your home or business. SERVPRO of Spring/Tomball can help.

Why should you choose to use SERVPRO for Spring /Tomball?  Because we understand it doesn’t take but a tiny bit of moisture to cause mold growth in the drywall in your Houston home or office.  You may not be able to see the mold growing but it is causing damage and the sooner you get rid of it, the better.

The Environmental Protection Agency (EPA) ruled that only licensed professionals can clean more than 10 square feet of mold. The EPA cannot know how you take care of your home or business, but you will need an inspection if you want to sell.

SERVPRO of Spring / Tomball holds the necessary licenses for mold remediation. Our expertise goes beyond just eliminating visible mold; we focus on eradicating the mold spores that give rise to mold growth, as well as tackling the underlying moisture issues.

Here's a snapshot of what you need to know about mold:

• Rapid Growth: Mold can begin colonizing a damp surface within a mere 24 hours.
• Material Destruction: Left unchecked, mold can wreak havoc on the materials it inhabits, causing deterioration.
• Contagious Spread: Mold is relentless in its ability to spread and destroy adjacent materials, making early intervention crucial.
• Airborne Spores: Mold reproduces from tiny spores that travel through the air, making its presence challenging to detect.
• Mold remediation means getting rid of the mold spores that become mold as well as fixing the root cause of the dampness.

SERVPRO of Spring / Tomball can effectively address mold issues by:

• Removing and replacing affected drywall.
• Disinfecting surfaces where necessary
• Identifying and addressing the root cause of moisture, effectively halting further mold growth.

Don't let mold compromise the integrity of your property. Trust the experienced professionals at SERVPRO of Spring / Tomball to remediate mold and safeguard your home or business. Contact us today for a comprehensive assessment and mold remediation solutions.

Links:

https://www.cdc.gov/disasters/mold/index.html

Does Your Home Have a Mold Problem?

3/27/2019 (Permalink)

In Houston and surrounding areas, mold can spread through a home in as little as 48 hours.

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

If You See Signs of Mold, Call Us Today – (281)374-6454

Mold, Mold, Mold!!!!

12/26/2018 (Permalink)

According to the Environmental Protection Agency (EPA), there are 10 important facts that we should all know about mold. 

1. Potential health effects
2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
4. Fix the source of the water problem or leak to prevent mold growth.
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
   • Venting bathrooms, dryers and other moisture-generating sources to the outside
   • Using air conditioners and de-humidifiers
   • Increasing ventilation
   • Using exhaust fans whenever cooking, dishwashing and cleaning
6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.

Emergency Ready Profile

10/9/2018 (Permalink)

The Best Way to Reduce Business Interruption Following a Disaster is to Plan For it NOW.

As many of 50% of businesses may never recover following a disaster, according to the latest industry research. Of the businesses the survive, the overwhelming majority of them had a preparedness plan in place. Pre-planning can serve as an insurance policy aimed at peace of mind. 

By developing a SERVPRO Emergency Ready Profile for your business, you minimize business interruption by having an immediate plan for action. Knowing what to do and what to expect in advance is the key to timely mitigation and can help minimize how water and fire damage can affect your business. 

The SERVPRO Emergency Ready Profile is a startup approach that provides the critical information needed to begin mitigation and recovery services. It is designed to serve as a quick reference of important building and contact information.

Mold Damage Tips!

5/14/2018 (Permalink)

In as little as 48 hours, mold can quickly become a problem in your home or business when there’s a water intrusion, like a roof leak or leaking water line.  SERVPRO of Spring / Tomball has the training, protective gear, and specialized equipment necessary to handle your mold problem.

Have a Mold Problem? 
Call Us Today – (281) 374-6454

If you have a mold problem in your home or business, consider the following facts:

• Significant mold growth can occur in 48-72 hours.
• Mold may present a greater risk to children, the elderly, and anyone with respiratory problems.
• A strong, musty odor may indicate hidden mold behind drywall or under carpeting.

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of Spring / Tomball for mold remediation services.

What Not to Do:

• Don’t touch or disturb the mold.
• Don’t blow air across any surfaces with visible or suspected mold growth.
• Don’t attempt to dry the area yourself.
• Don’t spray bleach or other disinfectants on the mold.

Mold Remediation Services

If you suspect that your home or business has a mold problem, SERVPRO of Spring / Tomball has the training, equipment, and expertise to handle the situation.

Mold Remediation Process

5/9/2018 (Permalink)

In as little as 48 hours, a minor mold issue can quickly spread through a home or business. Once you contact us, we’re dedicated to starting the remediation process quickly. This fast response lessens the mold damage, limits additional damage, and reduces the remediation cost

The Mold Remediation Process

Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same.

The steps listed below illustrate our process for a “typical” mold remediation infestation:

1. Emergency Contact - (281) 374-2632
2. Inspection and Mold Damage Assessment
3. Mold Containment
4. Air Filtration
5. Removing Mold and Mold-Infested Materials
6. Cleaning Contents and Belongings
7. Restoration

Review and Rate!!!

4/23/2018 (Permalink)

Did you love the work we provided for you?

Or do you have some concerns and would like us to know and take care of them?

WELL, IT MAY SEEM LIKE NOBODY USES IT-----BUT---Leaving us a review or rating on any of our three websites can help us make each and every job better one step at a time. We highly enjoy receiving reviews and ratings because of three honest reasons:

1.) We can address each customer based on their review/rating and publish it to our website!

2.) Why not make GREAT SERVICE known to others who are looking for a good company to perform work for them?

3.) It help's us is SO MANY WAYS by posting a good review for us!! And we are so incredibly grateful for them. We truly love reading the positive things people always have to say about SERVPRO of Spring/Tomball.

People don't realize these days that Reviews and Star Ratings can be SO IMPORTANT!!

So PLEASE, if you have ever used us before for services, don't ever hesitate to leave us a rating or review on the links below.

https://www.facebook.com/SERVPRO.springtomball

https://www.yelp.com/biz/SERVPRO-of-spring-tomball-tomball-2

Google us at SERVPRO of Spring/Tomball to leave a google review

Removing Mold from Carpet

4/18/2018 (Permalink)

Keeping your carpet clean can be a challenge. With the daily coming and going in and out of your home, we often track dirt, dust and other contaminants onto our carpets, despite our best efforts to keep our carpets spotless.

So what do you do if you happen to find some mold spots?

1. Upon discovering the mold, it’s important to start the process and remove mold from carpet as quickly as possible. If you can move the piece of carpeting or rug outside the house, do so.
2. Take a broom and sweep the affected area of the carpet. This will help loosen up the mold.
3. Next, vacuum the affected area of the carpet. After vacuuming, empty the contents of the vacuum bag directly into the trash.
4. Create a mixture of dishwashing liquid and water in a bucket.
5. Using a sponge, scrub the affected area of the carpet with the soapy solution you just mixed.
6. If you’re able to take the carpet outside, let it dry naturally in the sun. If the carpet is not movable, pat dry the surface using a dry towel or rag.

Facts about Mold!

3/26/2018 (Permalink)

• Molds are fungi that can be found anywhere, inside and outside. About 1,000 species of mold can be found in the United States, with more than 100,000 known species worldwide.
• Mold growth indoors should be avoided. Problems may arise when the mold starts eating away at materials, affecting the look, smell, and possibly affecting the structural integrity of wood-framed buildings.
• When excessive moisture or water accumulates indoors, mold growth usually will occur, particularly if the moisture problem remains uncorrected. While it is impossible to eliminate all molds and mold spores, controlling moisture can control indoor mold growth.
• Molds can slowly damage building materials and furnishings. If left unchecked, mold can eventually cause structural damage to a wood framed building, weakening floors and walls as it feeds on moist wooden structural members. 

If you suspect mold is growing in your home, visit our website or gives us a call for more information! www.SERVPROspringtomball.com or (281) 374-6454

Mold in your home

3/22/2018 (Permalink)

Mold can get in your home through vents, doors, windows, and heating/air conditioning units. Also, mold can grow in places with a lot of moisture such as around leaks in the ceiling, pipes, windows, or where there was some flooding.

4 tips on how you can control mold growth in your home:

1. Controlling the humidity levels in your home. Levels should be no higher than 50%. An air conditioner or dehumidifier will help you keep the level low.
2. Use exhaust fans which vent outside your house in the kitchen and bathroom. Make sure your dryer vents outside your home as well.
3. Immediately fix leaking windows, doors, and ceiling.
4. Thoroughly cleaning up within 24-48 hours after a flood.

Mold growth can have a musty smell and be different colors. If you can see or smell the mold in your home, your health can be at risk.

Cleaning Mold from Tiles & Grout

11/7/2017 (Permalink)

For more information please call SERVPRO® of Spring/Tomball 281-374-6454

Removing Mold from Tiles and Grout can be a lengthy process, but we do our best to get it taken care of in the proper steps.

First, begin by scrubbing the mold off the tiles and grout. You should use a scrubbing brush along with a household cleaning product or mold killing product. There are also commercial tile or grout cleaners you can buy.

After this you'll probably find there is still mold stains left on the grout. You can use bleach to fade these stains away. Before you use the bleach you should spot test it to make sure that it won't discolor your tiles. You should also wear gloves to protect your hands from the bleach.

Apply the bleach to the grout and leave it sit for about 10 minutes. Instead of chlorine bleach you can use hydrogen peroxide if you like. Another alternative is to use baking soda. Mix it with water to create a paste and then use a toothbrush to scrub it onto the grout.

If you find the stain remains on the grout after bleaching then repeat the process. Give it some time and this should fade away the mold stains on the grout.

What You Should Know About Mold

10/27/2017 (Permalink)

SERVPRO® of Spring/Tomball Please Call 281-374-6454

According to the Environmental Protection Agency (EPA), their are 10 things we should all know about mold. 

1. Potential health effects
2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
4. Fix the source of the water problem or leak to prevent mold growth.
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
   • Venting bathrooms, dryers and other moisture-generating sources to the outside
   • Using air conditioners and de-humidifiers
   • Increasing ventilation
   • Using exhaust fans whenever cooking, dishwashing and cleaning
6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.